introduction
The Compact Electric Cylinder is a servo-driven linear actuator that integrates a ball screw and motor into a compact housing. Designed for space-limited industrial automation systems, it converts rotary motion into precise linear motion.
Core Parameters
Rated Thrust: Up to 1T (medium load level, suitable for press-fitting, positioning, and lifting)
Standard Stroke: 0–1000mm (longer stroke customizable)
Transmission Structure: C7 Precision Ball Screw + Timing Pulley Offset Transmission
Repeat Positioning Accuracy: ±0.01~±0.02mm
Maximum Speed: 0–500mm/s (adjustable according to motor and reduction ratio)
Drive Compatibility: Compatible with mainstream servo/stepper motors such as Delta, Mitsubishi, Panasonic, Yaskawa, Siemens, etc.
Protection Level: IP67 (dust-proof and splash-proof, suitable for harsh industrial environments)
Service Life: More than 10,000km, 1-year warranty
Working Noise: ＜65dB(A), low-noise and environmentally friendly
|
LDE63 (Maximum Load 1000kg) |
||||
|
Motor Power (W) |
400W (3000rpm) |
750W (3000rpm) |
||
|
Rated torque N. m |
1.27 |
2.4 |
||
|
Driving mode |
Ball screw C7 conversion/ball screw C5 grinding (default C7) |
|||
|
Repeat positioning accuracy (mm) |
±0.02/±0.01 |
|||
|
Screw Lead (mm) |
5 |
10 |
5 |
10 |
|
Max speed (mm/sec) |
250 (1: 1) 30 (5: 1) 83.3 (3: 1) 35 (7: 1) 62.5 (4: 1) |
500 (1: 1) 71 (7: 1) 166 (3: 1) 50 (10: 1) 125 (4: 1) 41 (12: 1) 100 (5: 1) 33 (15: 1) |
250 (1: 1) 50 (5: 1) 83.3 (3: 1) 35 (7: 1) 62.5 (4: 1) |
500 (1: 1) 100 (5: 1) 166 (3: 1) 71 (7: 1) 125 (4: 1) |
|
Rated thrust (N) |
1360 (1: 1) 4080 (3: 1) 5440 (4: 1) 6800 (5: 1) 9520 (7: 1) |
680 (1: 1) 2040 (3: 1) 2720 (4: 1) 3400 (5: 1) 4760 (7: 1) 6800 (10: 1) 8160 (12: 1) 10200 (15: 1) |
1360 (1: 1) 4080 (3: 1) 5440 (4: 1) 6800 (5: 1) 9520 (7: 1) |
1275 (1: 1) 3825 (3: 1) 5100 (4: 1) 6375 (5: 1) 8925 (7: 1) |
|
Effective stroke (mm) |
10-1000 |
|||
|
Sensor |
Electronic magnetic switch*3 |
|||
features
Space-Saving Design
The motor is arranged in a parallel offset configuration, reducing overall cylinder length by approximately 30%–50% compared to direct-drive structures.
High Precision Transmission
Uses C7-grade precision ball screw and rigid aluminum/steel housing for stable linear motion, ensuring micron-level repeat positioning accuracy (±0.01–0.02 mm).
Servo-Controlled Motion
Supports multi-point positioning, programmable motion profiles, smooth acceleration and deceleration curves without mechanical shock.
Industrial Protection
Designed with IP67 protection level, resistant to dust, oil mist, and splash water.
Quiet Operation
Without hydraulic oil or compressed air, the cylinder operates with noise below 65 dB(A).
Low Maintenance
Factory-lubricated ball screw system reduces maintenance frequency, and fully electric drive eliminates the risk of oil leakage.
applications
- 3C / Electronics: Precision press-fitting, testing, dispensing, lamination, positioning, and lifting
- Automated Production Lines: Workpiece clamping, lifting, pushing, sorting, and station transfer
- Medical & Laboratory Equipment: Precision displacement control, mechanical testing, and simulation systems
- Packaging & Printing: Cutting, sealing, web guiding, and tension control
- Special / Custom Machinery: Medium-load precision linear motion applications in space-limited environments
LIND Standard installation method and size diagram
CB: Rear double pin ears
CA: Rear single sales ear
FB: Rear bottom plater
TC: Rear ear axle seat
LA: Horizontal bearing seat
FG: Front flange with guide postt
FA: Front flange
FTC: Front ear axle seat
J: Frontjoint bearing
Y: Y-shaped hinge
SP: pressure sensor
Selection & Service
- Standard product lead time: 7–10 working days
- Customization available for stroke, thrust, mounting configuration, and motor brand
- Provide selection support, programming, commissioning, and after-sales technical service
Company Profile
Wuxi LIND Automation Technology Co., Ltd., founded in 2015, is an integrated manufacturer specializing in the R&D, production, and sales of electric cylinders and press-fitting systems.
We offer a full range of light-duty and heavy-duty electric cylinders, as well as multi-stage and integrated actuator solutions to meet diverse industrial requirements.
The company holds over 40 national patents and maintains a strong position in the automation sector.
Headquartered in Wuxi, China, LIND has 13 branches across Mainland China and additional offices in Taiwan.
Feel free to contact us for technical support or customization inquiries.
FAQ
Q1: What advantages does the aluminum housing provide?
The aluminum housing reduces overall weight while maintaining structural rigidity. It also improves thermal stability during continuous operation.
Q2: How is positioning accuracy ensured?
The system uses a ball screw drive combined with servo or stepper control, enabling repeatable positioning at high precision levels. The rigid transmission design minimizes backlash and improves motion stability.
Q3: Can it replace pneumatic or hydraulic cylinders?
Yes. It is commonly used as a replacement for pneumatic or hydraulic cylinders in applications requiring:
- Better positioning control
- Adjustable speed and force
- Lower maintenance
It also reduces energy consumption and system complexity.
Q4: What control systems are compatible?
It can be integrated with PLC systems, servo drivers, pulse control, or industrial communication interfaces, making it suitable for flexible OEM machine integration.
Hot Tags: compact electric cylinder, China compact electric cylinder suppliers, factory, electric powered hydraulic cylinder, warner electric actuator mq939, micro electric actuator, micro switch actuator, High Precision Aluminum Electric Cylinder, fast electric cylinder
