introduction
The LOE25 direct-drive electric cylinder is a lightweight high-precision linear actuator built for fast, ultra-accurate linear motion control. It is widely applied in precision automated production lines covering 3C electronics, auto parts, food packaging and laboratory precision equipment, ideal for customers looking for compact, high-cycle servo linear drive solutions.
Products Features
• High-Speed Response
The direct-drive design transfers power directly to the drive shaft, enabling instantaneous motion and higher cycle rates.
• Wear Resistance
The hard-anodized surface finish provides a high-strength protective layer to minimize friction loss during high-frequency operation.
•Space Saving
The ultra-slim profile facilitates high-density parallel mounting in restricted machine layouts.
Why Ball Screw Instead of Lead Screw?
•Higher transmission efficiency:
Rolling friction of ball screws reduces energy loss compared with sliding friction of lead screws, cutting motor heat and power consumption.
•Superior positioning precision:
Preload design eliminates backlash, supporting repeat positioning accuracy down to ±0.01mm, far better than ordinary lead screws.
•Long service life under high speed:
Able to run continuous high-speed reciprocating motion without rapid wear, fit for 24/7 unmanned automation lines.
•Stable thrust output:
Maintains consistent rated thrust under frequent heavy load operation with no obvious power attenuation.
Why Direct Drive?
Traditional gear/belt transmission brings extra clearance, inertia and power loss. Our direct-drive design connects servo motor and ball screw directly:
• Zero mechanical clearance & backlash, stable positioning accuracy at all speed ranges.
• Lower motion inertia, faster acceleration & deceleration for shorter cycle time.
• Fewer vulnerable spare parts, lower maintenance cost and longer service cycle.
• Higher power transfer efficiency to save factory operation electricity cost.
Why Fold-back Design?
The fold-back integrated motor layout solves the major drawback of straight electric cylinders - excessive overall length.
• Ultra-compact overall size: Shortens total equipment length by over 30%, suitable for narrow cabinets and tight installation areas.
• Flexible installation angle: Folded motor can be arranged upward, downward or sideways to fit various equipment layout demands.
• High structural rigidity: Optimized internal fold-back structure avoids deformation under full load, keeping precision stable under rated thrust.
Technical Specifications
|
Motor Power (W) |
50W |
100W |
|
Rated torque N. m |
0.16 |
0.32 |
|
Driving mode |
Ball screw C7 conversion/ball screw C5 grinding (default C7) |
|
|
Repeat positioning accuracy (mm) |
±0.02/±0.01 |
|
|
Screw Lead (mm) |
4 |
4 |
|
Max speed (mm/sec) |
200 |
200 |
|
Rated thrust (N) |
214 |
427 |
|
Effective stroke (mm) |
10-400 |
|
|
Sensor |
Solenoid switch*3 |
|
Applications
3C Electronics
Component pressing, pick-and-place, and PCB testing.
Automotive Parts
Small assembly, switch inspection, and interior part handling.
Food Packaging
Labeling, automated sorting, and light-duty cartoning.
Precision Tooling
Micro-fixture positioning and laboratory automation
Customized Solutions For Different Applications
The LOE25 mini direct-drive electric cylinder supports customization according to different equipment requirements.
Available customization options include:
①Stroke length
②Motor specifications
③Ball screw precision & lead
④End fitting / Interface design
⑤Control methods and sensors
⑥Mounting structure
⑦Cable configuration
⑧Anti-corrosion coating & IP protection
Our engineering team can provide customized solutions for OEM/ODM projects and special automation applications.
Why Choose Us
Efficient Delivery
Modular inventory and optimized supply chain ensure rapid fulfillment of standard orders.
Proven Reliability
Industrial-grade material selection and fatigue testing ensure long-term operational stability.
Technical Support
Direct access to application engineering for rapid selection and integration guidance.
Market Recognition
Our miniature actuators are industry-proven and highly favored in major automation exhibitions across China.
Collaboration Partners
packaging
• Durable outer protection: Customized wooden box structure, resistant to pressure and moisture, suitable for sea transportation and multiple transit handling.
• Precision internal cushioning: high-density sponge foam is tailored according to the shape of the equipment to achieve tight packaging and prevent internal displacement and impact.
FAQ
Q: Are you a factory?
A: Yes, we are a factory specializing in electric cylinders, covering an area of 7,000 square meters.We focus on the production of electric cylinders and press-fit systems. Our factory integrates researchand development, manufacturing, and sales.
Q: What industries are your products primarily applied to?
A: Our electric cylinders are applied to six-degree -of-freedom platforms, car seats, packaging industry,medical equipment, metallurgy, petroleum, welding and other equipment.
Q: What is your delivery time?
A: The standard delivery time is 10 days. For non-standard custom orders, the delivery time may vary depending on the situation.
Hot Tags: mini electric cylinder, China mini electric cylinder suppliers, factory, electric hydraulic ram, Direct connect Electric Linear Cylinder, electric servo cylinder, micro servo linear actuator, 12v electric hydraulic cylinder, Electric Mini Actuators
